| BRAND | Z-LASER |
| Product | 722115032 / Z60-X20-H-F-450-elp45 |
| Description | High-precision laser module |
| Internal code | IMP4882651 |
| Technical specification | SYSTEM SPECIFICATIONS: Wavelength (typ.) 450nm Wavelength tolerance ±10nm Wavelength drift (typ.) 0.02nm/K Output power (typ.) 60mW Transverse Mode Single Transverse Mode RMS noise (20 Hz to 20 MHz, typ.) < 0.5% Peak-to-peak noise (20 Hz to 20 MHz, typ.) < 1% Boresight Error (Typ.) Typ. 3mrad Pointing stability <10μrad/K Power stability ± 3% over the entire temperature range Start time <2 sec APC operating mode Laser class (EN 60825-1) 3R ELECTRICAL SPECIFICATIONS: supply voltage 9-30VDC Operating current (max.) <300mA Electrical insulation potential-free housing M12 5-pin connector: A-pining connector Power consumption <2.7W I²C, RS-232 (5V) interfaces OPTICAL SPECIFICATIONS: Projection line, homogeneous intensity distribution Optical configuration Advanced DoF (elp) 45° opening angle Line straightness < 0.05% Line orientation parallel to Only in the clamping area Focusing range can be focused from 100 mm to 10,000 mm DIGITAL MODULATION: Maximum frequency: up to 400kHz Rise time <100 ns Fall time <100 ns Signal level < +0.9V (VIL_max) & > +2.2V (VIH_min) Operating range (VDC) ANALOG MODULATION: Maximum bandwidth <10Hz Linearity < 5% (from 10% to 100% of laser power) Active range 0-2VDC Impedance 100 kΩ to internal VCC (3.3 V) Max voltage range 0-30VDC ENVIRONMENTAL CONDITIONS: Operating temperature -10°C to +50°C/14°F to +122°F Storage temperature +40°C to +85°C/-40°F to +185°F Relative humidity (max.) <1W Shock and vibration in accordance with IEC EN 61373:2011, cat. 2 MECHANICAL SPECIFICATIONS: Case dimensions (⌀ x L) 20h7 x 117mm/0.79 x 461 in Material stainless steel Protection class IP67 |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Z-LASER - 722115032 / Z60-X20-H-F-450-elp45 High-precision laser module number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Paraguay Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
connector for a laser 40MW ZM18
connector
Thread adapter M18/Ø19mm
Ansclusskabel
positioning laser
24 volts, 50 mw power can be projected at a distance of 4-5 meters
line limiter
Red Laser + Support