BRAND | Berthold |
Product | 53214-008 |
Internal code | IMP513389 |
Weight | 1 |
Technical specification | UniProbe LB 490 Super-Sens Level Evaluation Unit super sensitive probe for radiometric measurements Organic scintillator 150/150 Collimator for irradiation: axial with lead shielding for reduction of background radiation Power supply 95 - 250 V, 50 - 60 Hz Menu controlled calibration via HART-communicator Automatic decay compensation Error indication Ambient temp: -40 to +55 - 1 analog output: 0/4 - 20 mA, isolated, passive, switchable to active - 1 digital-Input for hold-signal Relays: Max. 250VAC or 30VDC at max. 5A noninductive - 3 relays, alternative signals: hold, max / min alarm, detector temp., rad. interference - 1 failure relay 4 conduits radial 3/4" NPT Flame proof protection: ATEX II 2GD Ex d IIC T6 IP66 T 70°C flame proof protection FM/CSA: Class I, Division 1&2, Groups A, B, C, D Class II, Division 1&2, Groups E, F, G Protection: Nema 4X / IP 66 Housing: stainless steel with water cooling Customs tariff number: 90222900 |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Berthold - 53214-008 number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Paraguay Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
with PlugProtect plug connection
Radiometric Mould Level Measurement Sensor
(CsI 25x50 mm, with PlugProtect plug connection, scintillation counter, crystal CsI 25x50 mm, without water cooling)
GAMMAcast Detector
(CsI 25x50 mm, with PlugProtect plug connection, scintillation counter, crystal CsI 25x50 mm, with water cooling)
Density measurement device
(Rod detector: Nominal length 2000 mm Stainless steel housing with water cooling Dust Ex ATEX: II 2 D IP65 T80 ° C Operating temp .: -20 ° C ... 60 ° C)
Level Gauge
Vorverstärker-Board für LB 6752
Particle Fall Out Photometer
11332014 CPU board (card) for LB-3232 monitor
Detector use in LB-440-M levels in the measurement system Radioactive Source type: Co-60 source rod
Light Source
Radioactive Point Detector, Temperature stability: +/- 0.1% (at -20 to +50 Celsius),Operating Temperature: -40 #. + 60 celsius, Dose Rate (μsv / h) 300 cps: 0.5
Dosisleistungssonde
Density Evaluation Unit (Master)
plug connector
Level Evaluation Unit