Rössel-Messtechnik is offered by Onrion LLC for years at reasonable prices and delivery time to Paraguay . Check our web page for products from the brand Rössel-Messtechnik regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout Paraguay .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
(Flange fitting RM-type C14J-120/220 B1, B 1.4571-3.1 Connection head: Form BKD-RPH, IP 65 screw A2 Cable gland: M20 x 1.5, blue Neck / Shroud: mm ø14x2,5, W.-Nr.1.4571-3.1 B Extension Length: 120 mm Flange: Form B1, PN40 / DN25 : Mat 1.4571-3.1 B Installation length: 220 mm Rejuvenation: 40 mm ø 9x1 mm Inspection certificate: EN 10204 - 3.1 B)
(Protective tube with flange B1 RM-type 21.3 / 15.8 / 8.5, 115/500, 1.4876 - 3.1 B Connection, head end: M24x1,5 Shroud: 21.3 x 2.8 mm Ø W. no. 1.4876-3.1 B (Incoloy 800) Flange: Form B1, PN40 / DN40, EN 1092-1 W. no. 1.4571-3.1 B Rejuvenation: 50 mm x 3.7 mm ø15,8 W. no. 1.4959-3.1B (Incoloy 800 HT) Overall length: 636 mm Neck tube length: 115 mm from Allen Installation length: 500 mm Accessories: ring and seal Inspection Certificate: EN 10204 - 3.1 B)
Insulated resistance thermometer 2 x Pt100 / 0 RM-type B-15x2 / 6-365 / 35-400-1.4571 Measuring tip Ø6x35mm lg. 1.4571 m. Schutzro.verschweißt Connecting head: B-M24x1,5 / M20x1,5 Shroud: Ø 15 x 2 mm W. - 1.4571. Coat - measuring insert: WMM 5.0 / 6,0-2Pt-B-435 Coat - Material: Stainless steel W. - No. 1.4541. Coat - Ø: 5.0 mm : Measuring tip 50 mm reinforced : To Ø mm 6,0, W - 1.4571. Measuring insert: 435 mm Measuring resistance: 2 x FS Nominal length: 400 mm Special I: thermowell Ø15x2 is mm with the : Coat - Feeler : welded Special II: measuring insert is NOT interchangeable Special III: free probe tip Ø6,0 x 35 mm long W. - 1.4571. Limiting error MW: DIN EN 60751 class B. Drawing - No: 2-1506-00011.
Insulated thermal wire 1 x NiCr-Ni (type K) RM-type TT-465-2K-0,22l-IEC, cl. 1
(Mantel-NiCr-Ni, RM-Type: AL-RT-KB-3,0-6000-10, Kl.1, RT 4.5, copper braid: TG-412-2KX-0.25L, length: 10 m, casing material: Inconel 600, sheath diameter: 3.0 mm, length: 6000 mm, limit deviation: DIN IEC 584 Kl.1, feature: Anschweißplättchen, dim 4,5x6x18, bend protection, drawing no.:. 2-4005 -00,009)
Thermocouples
Certificate Acc. EN 10204 - 3.1
(Screw-Widerstandsth. 2 x Pt100 / 0 RM-type B8J-0/100, R1 / 2 ", 1.4571, connecting head: Form B, die-cast aluminum CABLE GLAND. : Plastic, gray (IP68) Liner: 8x1 mm : Mat 1.4571 stud: G1 / 2 "W-1.4571 Measuring Insert: WMR 810-2Pt-B-140 Installation length: 100 mm Limiting error DIN EN 60751 class B. Operating temperature: -50 to + 400 ° C Special> ME non-replaceable)
Insulated thermocouple 1 x NiCr-Ni (type K) RM type ALSTE KB 1,0-600-3, Kl.1, TT-465-IEC TS KM (HT) green with QM-3,2-HT
Insulated thermal wire 1 x NiCr-Ni (type K)
Insulated thermal cable
Immersion-Mineral-Insulated-Resistance-Thermometer
Adjustable flange
Immersion-Mineral-Insulated-Resistance-Thermometer
Measuring insert thermocouple NiCrSil-NiSil
Mantel-Widerstandsthermometer
Exhaust Temp RTD
Immersion jacket resistance thermometer
Thermometer